DIGITAL FAN CONTROLLER 1 CHANNEL TEMPERATURE AND HYSTERESIS 10A EU (1 FAN)

The GSE minimum temperature and speed controller with hysteresis control is able to modulate the air extraction speed according to the desired room temperature. GSE keeps the room temperature constant by preventing it from dropping below the desired value.
If the temperature rises above the set value, the controller will increase the extraction speed gradually to 100%. The hysteresis control allows you to adjust the desired temperature range.
It is easy to use: to program the desired temperature and minimum speed of the extraction system, simply use the two knobs. This unit comes ready to use and requires no wiring.
The extractor is connected via a German socket. The temperature sensor operates at low voltage and is therefore perfect for very humid environments.
The length of the sensor cable is four metres, if necessary it can be extended up to 50 metres.

Dimensions and technical data:
Packaging: 130mm x 80mm x 70mm.

Maximum load: 10A 230W/triac 1x45A
Volt: 230V / 50Hz
Digital sensor: 5V, measures temperatures from -55°C up to +125°C (-67°F up to +257°F)
Accuracy: +/- 0.5°C from -10°C up to +85°C
Protection class: IP54

Settings range:
Temperature: 20C°to 30C°
Minimum speed: off or 20% to 100%
Maximum speed: 100% to -50%
Negative pressure: 100% to -50%