DIGITAL FANCONTROLLER 1 CHANNEL TEMPERATURE AND MINIMUM SPEED GSE 10A (formerly GSE1)

The GSE temperature and minimum speed controller is able to modulate the air extraction speed according to the desired room temperature. GSE keeps the room temperature constant by preventing it from dropping below the desired value. In case the temperature rises above the set value, the regulator will increase the extraction speed gradually, reaching 100% power beyond 2°C from the desired temperature. It is easy to use: to program the desired temperature and minimum speed of the extraction system, simply use the two knobs. This appliance comes ready to use and requires no wiring. The extractor is connected via a German socket. The temperature sensor operates at low voltage and is therefore perfect for very humid environments.
The length of the sensor cable is four metres, if necessary it can be extended up to 50 metres.
Dimensions and technical data:
Packaging: 130mm x 80mm x 70mm.
Fan controller: 145mm x 100mm x 90 mm.
Maximum load: 10A / 200W / TRIAC 1x16A
Volt: 230V / 50Hz
Digital sensor: 5V, measures temperatures from -55°C up to +125°C (-67°F up to +257°F)
Accuracy: +/- 0.5°C from -10°C up to +85°C
Protection class: IP54