CLI-MATE - MINI CONTROLLER | LIGHTS 2X600W TEMPERATURE | 3A

The Cli-Mate Mini Controller is an all-in-one controller for simultaneous control of indoor climate, lighting and heating devices. It also counts with a DC connection to connect a clip-on fan, for example.

The Mini Controller can control two 600w sets and is equipped with a timer, divided into 15-minute intervals. The timer has three positions, ON, OFF and 100%.

To control the extraction and renewal of air, an extractor and extractor fan can be connected and configured to work at the desired power, and the extractor and extractor fans can be configured to create negative pressure, avoiding odour problems.

In the cold season, it is possible to connect an electric radiator that will be activated when the crop temperature falls below the set parameters, increasing and maintaining the temperature at its optimum point.

The Mini Controller has a degree-to-degree hysteresis controller on a scale of 1 to 7 °C.

With Mini Controller it is very easy to control your indoor growing, keeping it fully optimised for best results.

Technical characteristics Mini Controller Cli-Mate:

• Temperature range: 5-55º
• Power supply: single-phase 220 / 240v - 50Hz
• Switching differential: 1º to 7º
• Heater input: 3500w per input
• Maximum lamp input: 600w per input
• Dimensions: 250x220x120mm