Available
VENTS - CONDUCT HEATER NK100 | Ø 100mm - 600W
Cod. HET100
Brand: VENTS - VENTILATION SYSTEM
The body and terminal box of the NK duct heaters are made of galvanised steel and the heating elements are made of stainless steel.
The heaters are equipped with rubber seals for...
Standard price
€78,48 VAT included(22%)
Recalculation in progress …
The body and terminal box of the NK duct heaters are made of galvanised steel and the heating elements are made of stainless steel.
The heaters are equipped with rubber seals for connection to air ducts.
The NK duct heaters are equipped with two temperature detectors for operation and protection against overheating:
HEATING EXAMPLES:
Mounting with EU100 or dimmable extractor fans is recommended
NOTE: The heater must be mounted downstream (after) the extractor fan.
The heaters are equipped with rubber seals for connection to air ducts.
The NK duct heaters are equipped with two temperature detectors for operation and protection against overheating:
- sensor for operation with automatic restart and maximum operating temperature +50°;
- manual reset emergency protection with operating temperature +90°.
HEATING EXAMPLES:
- + 4°C with flow rate 200mc/h
- + 12°C with a flow rate of 100mc/h
Mounting with EU100 or dimmable extractor fans is recommended
NOTE: The heater must be mounted downstream (after) the extractor fan.
-
100x306x206 cm (WxLxH)
-
1,53 kg
-
1
