TROLMASTER - WATER DETECTOR FOR AQUA-X
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
Recalculation in progress … The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water monitor. When used in this way, the water detector is placed where the runoff will accumulate (or where water is introduced into the growing medium).Each output (solenoid or pump) on the Aqua-x can be "assigned" to a specific WD-1. Each time the solenoid or pump assigned to the WD-1 is activated by the Aqua-X, the WD-1 must detect water within an adjustable delay time. If water is not detected (pump or solenoid failure), the Aqua-x will send an alert to the user notifying them of "watering failure".
Up to 25 WD-1s can be connected to a single Aqua-X.
Key features water detector for Aqua-X from TrolMaster:
- LCD display, easy operation
- Addressing button
Technical specifications Aqua-X water detector by TrolMaster:
- Working environments: temperature 32-122 °F, humidity = 90%
- Packaging dimensions: 160 mm (W) x 86 mm (H)
Package contents:
- 1 x Water Detector
- 1 x Touch Spot
- 1 x RJ12 T-Splitter
- 1 x 16 feet RJ12 cable
-
1
